TASK LIST I I

WELDER OPERATOR	IDENTIFICATION	CLASS

Task ID

PRACTICAL TASK

Date

OAW - 1

OXYACETYLENE WELDING * REVIEW SAFETY & SET-UP

OAW - 9

HORIZONTAL BEADS

OAW - 10

HORIZONTAL BUTT JOINT

OAW - 11

HORIZONTAL TEE JOINT

OAW - 12

VERTICAL BEADS

OAW - 13

VERTICAL BUTT JOINT

OAW - 14

VERTICAL TEE JOINT

OAW - 15

OVERHEAD TEE JOINT

OAW - 16

OVERHEAD BUTT JOINT

OFC - 1

OXY-FUEL CUTTING * REVIEW SAFETY & SET-UP

OFC - 7

PIPE BEVELING MACHINE { 22 1/2 deg. 30 deg. & 37 1/2 deg. Bevels }

OFC - 8

SCARF - REMOVE FILLET & GROOVE WELD

OFC - 9

CUT OUT SHAPE TO SPECIFICATION

TB - 6

OXY-FUEL SILVER BRAZE * REVIEW SAFETY & SET-UP

TB - 7

BEAD FERROUS & NON FERROUS ALLOYS BEAD

TB - 8

FILLET WELD - SWEAT LAP JOINT

TB - 9

SWEAT TUBING - ALL POSITIONS

SMAW - 1

SHIELDED METAL ARC WELDING * REVIEW SAFETY & SET-UP

SMAW - 13

HORIZONTAL PAD / SHAFT BUILD UP ( E6010 - 7018 )

SMAW - 14

HORIZONTAL FILLET WELD { MULTI - PASS } ( E6010 & E7018 )

SMAW - 15

HORIZONTAL BUTT JOINT - V Groove 60 deg. ( E6010 ) [ 2G position ]

SMAW - 16

HORIZONTAL BUTT JOINT - V Groove 45 deg. ( E7018 ) [ 2G position ]

SMAW - 17

VERTICAL FILLET WELD { MULTI - PASS } ( E6010 & E7018 )

SMAW - 18

VERTICAL BUTT JOINT - V Groove 60 deg. ( E6010 ) [ 3G position ]

SMAW - 19

VERTICAL BUTT JOINT - V Groove 45 deg. ( E7018 ) [ 3G position ]

SMAW - 20

OVERHEAD FILLET WELD { MULTI - PASS } ( E6010 & E7018 )

SMAW - 21

OVERHEAD TEE JOINT ( E6010 & E7018 )

GTAW - 1

GAS TUNGSTEN ARC WELDING * REVIEW SAFETY & SET-UP

GTAW - 9

TEE JOINT {steel & aluminum} [ all positions ]

GTAW - 10

BUTT JOINT - V Groove 60 deg. {steel & aluminum}[ 1G thru 4G]

GTAW - 11

PIPE TO PLATE {steel & aluminum} [ 1F thru 5F positions ]

GTAW - 12

TUBE TO SHEET {steel & aluminum} [ 1F thru 5F positions ]

GTAW - 13

PIPE / TUBING {steel & aluminum} [ 1G position ]

GMAW - 1

GAS METAL ARC WELDING * REVIEW SAFETY & SET-UP

GMAW - 7

TEE JOINT ( all positions )

GMAW - 8

PIPE TO PLATE ( 1F thru 5F position )

GMAW - 9

BUTT JOINT - V Groove [ 60 deg. & 45 deg. ] {1G thru 4G }

GMAW - 10

WELD ALUMINUM ( bead - butt joint - lap joint - tee joint )

FCAW - 1

FLUX CORED ARC WELDING SET UP ( SAFETY )

FCAW - 2

WELD BEAD

FCAW - 3

LAP JOINT

FCAW - 4

TEE JOINT [ all positions ]

FCAW - 5

BUTT JOINT [ 1G thru 3G ]

----------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------

http://www.WelderTrainingandCertification.com * Lamont@MasterWelder.com